Supertenký LED panel 36W 2380Lm 6000ºK 60x60Cm 40 000H [HO-PAN59559536W-CW]

Popis Supertenký LED panel 36W 2380Lm 6000ºK 60x60Cm 40 000H [HO-PAN59559536W-CW]

The 60x60cm square LED panel has an elegant finish, a silver lacquered aluminum frame and an ultra-thin design of only 12mm. immediate start-up, without noise and without flickering, this LED Panel is perfect for places where you want to maximize the illuminated space, projecting light uniformly and without glare.

It offers solutions for offices, factories, supermarkets , stores and for residential use, due to its design and elegant finish, it represents an efficient alternative for the most demanding designers. It can be installed directly to outlets supplied by the electrical network (85-256VAC) with a service frequency of 50/60Hz. It has a high efficacy (66 Lm/W) consuming 36W through 320 SMD3014 type LEDs and managing to provide a luminous flux of 2380Lm distributed uniformly by an opal plastic diffuser from which a color rendering index of 80 is obtained< /strong>. It provides lighting equivalent to a 200W incandescent bulb, its consumption represents a value of 36kWh/1000h, reducing the amount of energy billed and the emissions of polluting gases into the atmosphere.

This panel is powered by a Non-dimmable driver included in the package that must be connected directly to the network, with an output connector compatible with the connection of the panel (36-66VDC, 600mA), the accessories necessary for the installation of the panel on the surface are optionally offered .

Grey finish built with aluminum. The panel has a IP25 degree of protection (valid for dust and humidity indoors), as well as being robust enough for the required mechanical requirements.

These extra-flat LED screens consume up to 55% less and they do not require any type of maintenance, with which we avoid substitutions of primers or reactances. And having the advantage of being a much lighter and more manageable product.

The led panel can be used supported on Armstrong false ceiling, on plasterboard with the help of the fastening clips for led panels, with which we can embed said panel in the ceiling, or with suspension kits for led panels. These kits are made up of four tensors, one in each corner, allowing us to achieve the desired height or inclination to give the perfect touch to our decoration.

This panel is available in natural white (4200°K ), cold white (6000°K) and warm white (3000°K). The indicated color temperature may suffer fluctuations corresponding to a tolerance of 7%.