Free shipping from

3 years warranty
Free Technical Advice
Free 60-day return
GB United Kingdom
£

Module 30W 3.000Lm 6000ºK LED Epistar 900Ma 40.000H [CH-COB-30W-EP-CW]

  • GreenIce
    ★★★★★ ★★★★★
    3 Comments
    Normative 2021 Normative 2023
    Data Sheet EPREL Show features
    Save to purchase later
    Tone of Light: ?
    • Daylight
      Calculating stock ...
    • Warm White
      Calculating stock ...
    • Cool White
      Calculating stock ...

    £ 7.42

    - +

    VAT Included
    Save to purchase later
    3 years warranty

    Finance your purchase

    Advantages of buying in GreenIce?

    • 100% free returns
    • 60 day return
    • More than 20,000 products in our catalog
    • Up to 10 year warranty
    Module 30W 3.000Lm 6000ºK LED Epistar 900Ma 40.000H [CH-COB-30W-EP-CW]
    Module 30W 3.000Lm 6000ºK LED Epistar 900Ma 40.000H [CH-COB-30W-EP-CW]
    £ 7.42

    Translated automatically from Español (Spanish).

    Module 30W 3.000Lm 6000ºK LED Epistar 900Ma 40.000H [CH-COB-30W-EP-CW]

    The Epistar COB Modules are specially indicated for the substitution of the LED diodes installed inside bulbs, spotlights, downlights, LED high bays and in general all kinds of street lighting luminaires.

    These diodes consist of a plastic coating material (PVC) that surrounds the high-quality semiconductor material, supported by a 1 mm metal base that acts as an elementary heatsink plate. Due to the reduced thickness of this metal plate, it is convenient to mount them on another larger dissipating surface to avoid high temperatures.

    In addition, the quality and design of these LEDs allow their power to be optimized to the maximum, obtaining levels of much higher lighting than conventional ones. These have two connectors (positive and negative) located one diagonally from the other, thus enabling a better distribution of electrical energy.

    Utilities: strong>

    • Individual: powering the LED directly from the power supply through a regulated source or with the use of resistors or regulators. The desired voltage must be supplied to the LED within the working values.
    • Parallel configuration:power a group of LEDs by connecting all the anodes together and all the cathodes together,using the required voltage regulated by a single resistor in series.
    • Settings in series: supply of a group of LEDs connected sequentially. The number of LEDs to use per series will be limited by the voltage delivered by the power supply.
    • Polarization: the positive pole of the power supply must be connected to the anode (or to the beginning of the series) , while the negative pole must be connected to the cathode (or to the closure of the series).
    Grade 
    Moises 05/24/2022
    Grade 
    Giorgio 03/23/2021
    Grade 
    MIGUEL ANGEL 07/16/2018