Superslim LED Panel 40W 4,500Lm 6000ºK 60x60Cm UGR19 40,000H [IDI-PL-595-40-CW]
-33%£ 45.52
£ 30.35
Advantages of buying in GreenIce?
- 100% free returns
- 60 day return
- More than 20,000 products in our catalog
- Up to 10 year warranty
Superslim LED Panel 40W 4,500Lm 6000ºK 60x60Cm UGR19 40,000H [IDI-PL-595-40-CW]
The 60x60cm square LED panel has an elegant finish, a white lacquered aluminum frame and an ultra-thin design of only 12mm. immediate start-up, without noise and without flickering, this LED Panel is perfect for places where you want to maximize the illuminated space, projecting light uniformly and without glare.
It offers solutions for offices, factories, supermarkets , stores and for residential use, due to its design and elegant finish, it represents an efficient alternative for the most demanding designers. It can be installed directly to the power outlets supplied by the electrical network (85-265VAC) with a service frequency of 50/60Hz.
It has a high efficiency (112.5 Lm/ W) consuming 40W through 240 SMD4014 type LEDs and managing to provide a luminous flux of 4500Lm uniformly distributed through an opal plastic diffuser from which a color rendering index of 80 is obtained. It provides lighting equivalent to an incandescent light bulb of 220W, its consumption represents a value of 40kWh/1000h, reducing the amount of energy billed and the emissions of polluting gases into the atmosphere.
This panel is powered by a non-dimmable driver included in the package that It must be connected directly to the network, with an output connector compatible with the connection of the panel (55-86VDC, 600mA), the necessary accessories for the installation of the panel on the surface are optionally offered. White finish built with aluminum. The panel has a IP25 degree of protection (valid for dust and humidity indoors), in addition to being robust enough for the required mechanical demands.
These extra-flat LED screens consume up to 55% less and they do not require any type of maintenance, with which we avoid substitutions of primers or reactances. And having the advantage of being a much lighter and more manageable product.
The led panel can be used supported on Armstrong false ceiling, on plasterboard with the help of the fastening clips for led panels, with which we can embed said panel in the ceiling, or with suspension kits for led panels. These kits are made up of four tensors, one in each corner, allowing us to achieve the desired height or inclination to give the perfect touch to our decoration.
This panel is available in cool white (6000°K ) and natural white (4000ºK). The indicated color temperature may suffer fluctuations corresponding to a tolerance of 7%.