Free shipping from

3 years warranty
Free Technical Advice
Free 60-day return
GB United Kingdom
£

Strip of 600 LEDs 48W 2.400Lm SMD3528 12VDC IP65 x5M 40.000H [PL219006]-

  • GreenIce
    ★★★★★ ★★★★★
    4 Comments
    Save to purchase later
    Tone of Light: ?
    • Cool White
      Calculating stock ...
    • Blue
      Calculating stock ...
    • Green
      Calculating stock ...
    • Red
      Calculating stock ...
    • Yellow
      Calculating stock ...
    • Warm White
      Calculating stock ...

    £ 18.83

    - +

    VAT Included
    Save to purchase later
    3 years warranty

    Finance your purchase

    Advantages of buying in GreenIce?

    • 100% free returns
    • 60 day return
    • More than 20,000 products in our catalog
    • Up to 10 year warranty
    Strip of 600 LEDs 48W 2.400Lm SMD3528 12VDC IP65 x5M 40.000H [PL219006]-
    Strip of 600 LEDs 48W 2.400Lm SMD3528 12VDC IP65 x5M 40.000H [PL219006]-
    £ 18.83

    Strip of 600 LEDs 48W 2.400Lm SMD3528 12VDC IP65 x5M 40.000H [PL219006]-

    The 5000mm diameter, 8mm thick LED strip offers solutions for outdoor lighting. Lighting using LED strips provides original solutions that meet the most demanding tastes for both commercial and residential use. It can be installed at 12VDC.

    It has an efficacy of 50 Lm/W consuming 48W through 600 SMD3528 type LEDs and managing to provide a luminous flux of 2400Lm evenly distributed along 5 meters in length, providing 480 Lm/m with 9.6 W/m, obtaining a color rendering index of 85. Its consumption represents a value of 48kWh/1000h, reducing the amount of energy billed and emissions of polluting gases into the atmosphere. This strip can be powered by a 12VDC electrical power source (Battery, power supply, transformer or rectifier). It can be cut every 3 LEDs (25mm) and has 120 LEDs/m, emitting a point of light every 8mm. White finish built with PCB and 3M tape ideal for adhering to different types of places.

    This strip has an IP65 degree of protection (valid for dust and humidity outdoors), as well as being robust enough for the required mechanical demands.

    To install an LED strip you will need: A controller, a power supply either indoors or Exterior. It also has accessories to connect and splice LED strips, in case you want to join more than 8 meters of LED strip you will need an amplifier.

    It is recommended not to exceed 8 meters of LED strip length if only one power supply is available, as it loses intensity. In the event that more length is necessary, an amplifier and a power supply will be needed every 8 meters to prevent the installation from losing intensity.

    Ideal for: strong>

    • Under shelf lighting
    • Highlight contours of objects, walls, ceilings, etc.
    • Provide indirect light in closed spaces.
    • Outline circular and square spaces.
    • Lighting showcases, shelves, corridors and shop windows
    Grade 
    Jose Manuel 01/7/2020
    Grade 
    Amadeo 09/10/2018
    Grade 
    Juan Manuel 08/2/2015
    Grade 
    Joan 03/28/2015