Free shipping from

3 years warranty
Free Technical Advice
Free 60-day return
GB United Kingdom
£

LED High Power 5W 500Lm 6000ºK COB 40.000H [CH-COB-5W-CW]

  • GreenIce
    ★★★★★ ★★★★★
    8 Comments
    Normative 2021 Normative 2023
    Data Sheet EPREL Show features
    Save to purchase later
    Tone of Light: ?
    • Warm White
      Calculating stock ...
    • Cool White
      Calculating stock ...

    £ 1.44

    - +

    VAT Included
    Save to purchase later
    3 years warranty

    Finance your purchase

    Advantages of buying in GreenIce?

    • 100% free returns
    • 60 day return
    • More than 20,000 products in our catalog
    • Up to 10 year warranty
    LED High Power 5W 500Lm 6000ºK COB 40.000H [CH-COB-5W-CW]
    LED High Power 5W 500Lm 6000ºK COB 40.000H [CH-COB-5W-CW]
    £ 1.44

    Translated automatically from Español (Spanish).

    LED High Power 5W 500Lm 6000ºK COB 40.000H [CH-COB-5W-CW]

    The High Power COB LEDs are usually used to replace all types of lamps.

    These LEDs are covered by a kind of silicone surrounded by a white plastic, supported on a metal base that acts as a pre-dissipating plate. Due to their metal base, they must be mounted on another dissipating surface to avoid high temperatures.

    High Power COB LEDs have four connectors, 2 with positive polarity and 2 negative, from which it is possible to connect them by soldering them using a tin point.

    Utilities:

    • Individual: direct LED power supply from the power supply through a regulated source or with the use of resistors or regulators. The desired voltage must be supplied to the LED within the working values.
    • Parallel configuration: power supply of a group of LEDs connecting all anodes together and all cathodes together, using the required voltage. It is regulated by a single resistor in series.
    • Series configuration: power supply for a group of LEDs connected sequentially. The number of LEDs to use per series will be limited by the voltage delivered by the power supply.
    • Polarization: the positive pole of the power supply must be connected to the anode (or to the beginning of the series) , while the negative pole must be connected to the cathode (or to the closure of the series).
    Grade 
    christianccmhotmailcom 01/7/2023
    Grade 
    Remigio 06/6/2022
    Grade 
    Bruno 02/7/2022
    Grade 
    Franco 11/22/2021
    Grade 
    Nieves 04/14/2021
    Grade 
    Massimo 04/11/2021
    Grade 
    JOSE JOAQUIN 05/30/2015
    Grade 
    JOSE JOAQUIN 05/30/2015