Name: Taśmy LED
Brand: GreenIce
Rating: 5 (14 reviews)

Question 1

Differences between analog and digital LED strips

Accepted Answer

The main difference between the strips Analog And digital are the channels for which they are formed. The analogue RGB strips have 4 channels, being the Power (12/24 V), the Red (R), the Green (G) and the Blue (B). On the other hand, the digital strips are made up of 4 or 3 channels depending on the type of chip that the RGB digital LED strip is made of. For example, the WS2811 and WS2812 strips are composed of only three channels being the power supply (5 VDC or 12 VDC), Ground (GND) and data. by the otherwise, The UC1903 or SC6803 chip strips are formed by 4 channels being the power supply (12 VDC), ground (GND, clock (CLK) and data.

Within the world of digital strips there are multiple models of chips. Some of them are the following: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912.

Question 2

How to choose the transformer for your LED strip?

Accepted Answer

The transformer is the most important element when designing a 12/24 VDC LED strip installation Since, if we perform a poor sizing of the installation, what we will achieve is to damage the strip and not be able to perform the installation correctly. When calculating the power that has to take into account the transformer, we have to know the consumption per meter of the LED strip. For example:

The SMD 5050 LED strip with reference PL219009 has a consumption of 72W for every 5 meters. This every meter has a consumption of 14.4 W/meter. Once we have clear this data, the next step is to multiply by the meters of installation. If we want to make an installation of 8 meters of this strip, the installation will have a consumption of 115.2 W. The transformer we will have to choose will be from 200w. When choosing the transformer, it is recommended to leave a margin of 10-20% so that the transformer does not work at 100% at any time.

Question 3

RGB LED Strip Mounting

Accepted Answer

Question 4

Voltage ranges of a strip

Accepted Answer

Inside the LED strips we can find 4 voltage ranges that we will consider how the main ones. These are: 5VDC, 12 VDC, 24 VDC and 220 VAC.

-

5 VDC LED Strips

: Within this section we can encompass the strips that have direct connection to a USB port and some digital strips. are not the most common we can find in the market, although it is well to quote them for the user Know.

-

12/24 VDC LED Strips

: This type of strips is common in the GreenIce catalog. As for the advantages that we offer this type of strips is that can be cut every 5 cm in 12 VDC and 10 cm in 24 VDC. With this type of strips, more precise installations can be made than with the strips of direct connection to network. In addition, the Working in low voltage ranges, handling them is simpler and less dangerous. The main drawback of working with this type of strips is the length of the facilities. From GreenIce we recommend not to make installations of more than 10 meters so as not to have voltage drops and therefore loss of Lighting, In addition, it is necessary to install a transformer that converts the current that pours the mains power to the working voltage of the strips. This condition is a handicap in some facilities where a transformer cannot be installed.

-

220 VAC LED Strips

: This type of strips is a "modified" version of the 12/24 VDC strips so that they can be connected directly to the mains by means of an outlet. The main advantage, how we mentioned earlier, is that these LED strips are connected directly to the power grid so that we save the so annoying transformer. In addition, with this type of strips the problem of the voltage drop does not exist so that we can make installations of 50 meters linear without any problem. As for the drawbacks, we can find that with this type of strips cannot make more precise installations because you can only make cuts every meter, so the facilities have to be multiples of 1 meter. Also, when working in a high voltage range, it is necessary to be more cautious in its installation and handling.

Question 5

Elements necessary for the installation of strips and hoses to 220v

Accepted Answer

Like the rest of the products that use LEDs as a lighting source, the 220v strips and hoses have LEDs that work in direct current, therefore, require a rectifier that converts the alternating current into direct current to make That the LEDs work correctly. The following is an example of a typical driver plug for 220v SMD2835 220v led strips.

This plug would be connected directly to the mains (220VAC) and by means of the rectifier (white box) converts the electrical power of alternating current into direct current, finally, it has the connector for the strips and a skewer.

Question 6

Single Color LED Strip Mounting

Accepted Answer

Question 7

How do I get the colors on the RGB strips?

Accepted Answer

RGB strips can provide the Red colors, blue and green because they have integrated a chip of the colors previously named. In order to obtain more colors, you need to install a controller that will manage when each one is activated, so that one color or another is obtained. It then shows you how to get different colors depending on how you mix the red, green and blue.

Question 8

How to choose the right Led strip?

Accepted Answer

The number of LEDs on the meter directly affects the luminosity provided by the LED strips and their consumption. Depending on the lighting objective you need you will have to use one type of strip or another. Next, we show a rule to properly choose the strip that best suits your needs depending on the LEDs/meter that has the strip.

- 30 LEDs/meter: lighting in person. Used to highlight the selected items in a dim way.

- 60 LEDs/meter: Used to provide standard lighting. Used for integration in moldings, walkways, bar bars, etc.

- 120 LEDs/meter: for when the lighting requirements are high. Very used for signage, outdoor lighting, etc.

Question 9

Types of strip according to the type of LED

Accepted Answer

Entering a little more on the chips that use the LED strips, we will explain more detailed the most used chips in the market and its main uses.

-

SMD strips 3528/2835

This type of chip is used for low power strips and low consumption. How they have a low consumption are usually used in facilities where the light required is decorative. They are monochromatic strips and the most economical option.

Strips SMD 5050

This type of LED strips has a higher consumption and provide more power than the SMD 3528. They are used for installations, where lighting requirements are greater than a purely professional illumination. They are monochromatic and multicolor strips (RGB).

-

SMD Strips 3014

This type of strips is more used when the purpose is decorative. Have a higher density of LEDs On the strip so that the lighting it provides is high intensity and continuously. They are strips with low consumption, but with exceptional luminous performance.

SMD 5630 strips

This type of strips provides a greater amount of light with the same consumption of SMD 5050 strips. This type of strips is used for installations where high light power is required. These strips are monochrome and used in professional installations where high power is required.

Question 10

How do RGB products work?

Accepted Answer

RGB products are built with red, green and blue LEDs, in some cases located on the same chip and in others on three separate chips, thanks to this configuration it is possible to make color mixes controlling the power in each color, thus obtaining a wide range of colors.

Primary Colors

: Red (R), Green (G) and Blue (B).

Secondary colors

: Yellow, pink, turquoise blue, orange, purple and "white".

The primary colors are the ones that provide any RGB product we have in the catalog. The secondary colors are obtained from the blend of the primary colors, so to perform this effect is necessary a controller.

The wavelengths of the colors are as follows:

Red: 625-740 nm

Orange: 590-625 nm

Yellow: 565-590 nm

Green: 500-565 nm

Cian: 485-500 nm

Blue: 440-485 nm

Violet: 380-440 nm

Question 11

Parts of a Transformer

Accepted Answer

Question 12

How to connect the LED strips with amplifiers

Accepted Answer

Taśmy LED

Selected by GreenIce

Transformator LED 60W 230VAC/12VDC IP25

Pasek 360 diod LED 72W 4200Lm 3000°K SMD5050 RGB-Ciepła biel x5M 40000H

Kontroler Pasek Ledowy RGB-Biały

T Złączeira LED RGB 4 Kołek

Profil Aluminium Facet SOLIS 2,02M

Transformator LED 230VAC/12VDC 72W 6A IP25

Pas 60 LEDs/M 100W 6.900Lm CRI85 SMD5054 12VDC IP20 x5M 40.000H -Zimna Biel

Profil Aluminium Do Taśmy Led Instalacja Sufity Dyfuzor Mleczny x 1M

LRS-50-12 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 12VDC 4,2A 50,4W Izolacja 3750VAC EN60335-1/EN615558

Profil Aluminium Do Taśmy Led Dyfuzor Przezroczysty LLE-A1707-T x 2M

Profil Aluminium Do Taśmy Led Instalacja Schody - Dyfuzor Mleczny x 1M

LRS-50-15 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 15VDC 3,4A 51W Izolacja 3750VAC EN60335-1/IEC/EN61558

Pas 360 LEDs 72W 4.200Lm SMD5050 RGB-Ciepły Biały x5M 40.000H -Ciepły Biały

Kontroler Mini Pasek Ledowy RGB 12-24VDC ► 288WPilot

T Złączeira LED SMD5050/5630 2 Sposób Podwójnie 12/24VDC

Transformator LED 230VAC/12VDC 120W 10A IP20

Pasek 270 diod LED 50W 2600Lm SMD5050 12VDC IP20 Digital Magic Chasing x5M 40000H

Opornik Pasek Ledowy Pilot 12-24VDC ► 96/192W

T Złączeira LED SMD5050/5630 2 Sposób Pojedynczy 12/24VDC

Profil Aluminium Do Taśmy Led Instalacja Ściany - Dyfuzor Mleczny x 1M

LRS-50-24 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 24VDC 2,2A 52,8W Izolacja 3750VAC EN60335-1/IEC/EN6155

Pas 60 LEDs/M 100W 6.900Lm CRI85 SMD5054 12VDC IP65 x5M 40.000H -Zimna Biel

Kontroler Rozebrać Się Cyfrowy 12VDC Gonić Magię Pilot

Pas 270 LEDs 50W 2.600Lm SMD5050 12VDC IP65 Gonić Magię Cyfrowy x5M 40.000H -Wielobarwny

Transformator LED 24VDC 35W/1.45A IP20

T Złączeira LED SMD5050 10Mm RGB 4 Sposób Podwójnie 12/24VDC

Profil Aluminium Do Taśmy Led Półki Szkło 6Mm x 1M

Profil Aluminium Do Taśmy Led Dyfuzor Przezroczysty LLE-ALP001-RL x 2M

LRS-50-36 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 36VDC 1,45A 52,2W Izolacja 3750VAC EN60335-1/IEC/EN615

Profil Aluminium Do Taśmy Led Oświetlenie Schody - Dyfuzor Mleczny x 1M

LRS-50-48 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 48VDC 1,1A 52,8W Izolacja 3750VAC EN60335-1/IEC/EN6155

Pas 300 LEDs 72W 4.200Lm SMD5050 12VDC IP65 PCB Czarny x5M 40.000H -RGB

Żarówka punktowa Ledvance/Osram LED G53 13,5 W 950 lm 2700 K 24° IP20 Możliwość przyciemniania

Złącze Dc IP65 Płeć Żeńska

Transformator LED 24VDC 60W/2.5A IP20

Wzmacniacz RGB 24VDC IP20 Max. 288 W

Profil Aluminium Facet A 2,02M

Złącze Dc IP65 Męski

Transformator LED 24VDC 100W/4.2A IP20

Pas 300 LEDs 80W 4.400Lm CRI85 SMD5630 12VDC x5M 40.000H -Zimna Biel

Obudowa Transformatora Profil SU-M001B x 1M

LRS-100-33 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 3,3VDC 20A 66W Izolacja 3750VAC

Profil Aluminium Do Taśmy Led Dyfuzor Mleczny x 2M

Profil Aluminium Lustra Mleczny x 1M

LRS-100-5 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 5VDC 18A 90W Izolacja 3750VAC

Opornik Pasek Ledowy Pilot 12-24VDC ► 96/192W Wielofunkcyjne

Transformator LED 200W 24VDC 6,5A IP20

T Złączeira LED RGB IP65

Opornik Pasek Ledowy 12VDC ► 96W

Szybkie Złącze + Pasek Ledowy 12/24VDC SMD3528/2835

Transformator LED 24VDC 250W/10.1A IP20

LRS-100-12 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 12VDC 8,5A 102W Izolacja 3750VAC

Pas 300 LEDs 80W 4.400Lm CRI85 SMD5630 12VDC x5M 40.000H -Zimna Biel

Ściemniacz Kontrolera I-Touch Pasek Ledowy Jeden Kolor 12-24VDC ► 13M

Szybkie Złącze + Pasek Ledowy SMD5050/5630 12/24VDC

Transformator LED 350W 24VDC 14,6A IP20

LRS-100-15 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 15VDC 7A 105W Izolacja 3750VAC

LRS-100-24 Transformator MEANWELL W: 85-264VAC Na Zewnątrz: 24VDC 4,5A 108W Izolacja 3750VAC

Kontroler WIFI Podwójnie Pasek Ledowy RGB Comptable Alex/Google Home Z Pilotem

Szybkie Złącze + Pasek Ledowy RGB 12/24VDC

Podstawowe pojęcia pasków LED

Shipping to

Current: Polska / Zl