Superslim LED Panel 72W 7,900Lm 6000ºK 120x60Cm 40,000H [HO-PAN120060072W-CW]
-14%£ 82.86
£ 71.09
Advantages of buying in GreenIce?
- 100% free returns
- 60 day return
- More than 20,000 products in our catalog
- Up to 10 year warranty
Superslim LED Panel 72W 7,900Lm 6000ºK 120x60Cm 40,000H [HO-PAN120060072W-CW]
The 1195x595mm rectangular LED panel has an elegant finish, a silver lacquered aluminum frame and an ultra-thin design of only 12mm. immediate start-up, without noise and without flickering, this LED Panel is perfect for places where you want to maximize the illuminated space, projecting light uniformly and without glare.
It offers solutions for offices, factories, supermarkets , stores and for residential use, due to its design and elegant finish, it represents an efficient alternative for the most demanding designers. It can be installed directly to outlets supplied by the electrical network (85-265VAC) with a service frequency of 50/60Hz.
It has a high efficiency (110 Lm/W) consuming 72W through 320 SMD2835 type LEDs and managing to provide a luminous flux of 7900Lm uniformly distributed by an opal plastic diffuser from which a color rendering index of 80 is obtained. It provides lighting equivalent to a 400W incandescent bulb , its consumption represents a value of 72kWh/1000h, reducing the amount of energy billed and the emissions of polluting gases into the atmosphere.
This panel is powered by two non-dimmable drivers included in the package that must be connected directly to the network, with an output connector compatible with the connection of the panel (38-65VDC, 600mA), the necessary accessories for the installation of the panel on the surface are optionally offered. Gray finish built with aluminum. The panel has an IP25 degree of protection (valid for dust and humidity indoors), as well as being robust enough for the required mechanical demands.
These extra-flat LED screens consume up to 55% less and they do not require any type of maintenance, with which we avoid substitutions of primers or reactances. And having the advantage of being a much lighter and more manageable product.
The led panel can be used supported on Armstrong false ceiling, on plasterboard with the help of the fastening clips for led panels, with which we can embed said panel in the ceiling, or with suspension kits for led panels. These kits are made up of four tensors, one in each corner, allowing us to achieve the desired height or inclination to give the perfect touch to our decoration.
This panel is available in natural white (4200°K ), cold white (6000°K) and warm white (3000°K). The indicated color temperature may suffer fluctuations corresponding to a tolerance of 7%.