Free shipping from

3 years warranty
Free Technical Advice
Free 60-day return
GB United Kingdom
£

LED Tube T8 10W 1.000Lm 6000ºK 60Cm Dimmable 40.000H [GR-T8DIM10W-O-CW]

  • GreenIce
    ★★★★★ ★★★★★
    1 Comments
    Normative 2021 Normative 2023
    Data Sheet EPREL Show features
    Save to purchase later
    Tone of Light: ?
    • Daylight
      Calculating stock ...
    • Warm White
      Calculating stock ...
    • Cool White
      Calculating stock ...

    £ 14.50

    - +

    VAT Included
    Save to purchase later
    3 years warranty

    Finance your purchase

    Advantages of buying in GreenIce?

    • 100% free returns
    • 60 day return
    • More than 20,000 products in our catalog
    • Up to 10 year warranty
    LED Tube T8 10W 1.000Lm 6000ºK 60Cm Dimmable 40.000H [GR-T8DIM10W-O-CW]
    LED Tube T8 10W 1.000Lm 6000ºK 60Cm Dimmable 40.000H [GR-T8DIM10W-O-CW]
    £ 14.50

    Translated automatically from Español (Spanish).

    LED Tube T8 10W 1.000Lm 6000ºK 60Cm Dimmable 40.000H [GR-T8DIM10W-O-CW]

    The LED Tube is made with an aluminum body that offers greater rigidity and better heat dissipation, making it suitable for continuous lighting. with an opening angle of 120º and a polycarbonate cover opal.Incorporates SMD2835 chip, emits less heat, increases useful life with continuous lighting.

    Benefits of an LED tube:

    • The main advantage is energy savings, of more than 50%. It should be noted that the consumption of a conventional tube, apart from its own consumption, requires a ballast whose consumption ranges between 3 and 8 Watts per tube. Another fundamental advantage is the saving in maintenance (replacement of primers, ballasts, and tubes...) since the LED tube does not need ballasts or primers.
    • Hours of life: LED tubes last longer 30,000 hours, compared to 10,000 hours for a good fluorescent tube
    • Resistance: LED tubes can withstand shocks or vibrations much more than fluorescent tubes. In fact, they are removable and repairable, something impossible for fluorescent tubes.
    • Consumption: LED tubes consume up to 50% less than fluorescent tubes. A 90cm T8-18W fluorescent tube with ballast and starter can consume twice its rated power due to ballast. We are talking about a consumption of 36W compared to the 8 or 12 W of the consumption of the 60Cm T8 LED tube.
    • Started: The LED tubes are instant start and do not affect their hours of life. In change, a fluorescent tube takes time to start and the number of daily starts affects its life.
    • Environment: LED tubes do not need any gas to light up , fluorescent tubes are made with mercury vapor and mercury compounds, they are highly dangerous chemicals for human health and the environment.

    Installation instructions for led tubes :

    • Step 1: Disconnect the electrical current.
    • Step 2: Remove the conventional fluorescent tube.
    • Step 3: Unscrew and remove the primer, then disconnect the wires from the ballast.
    • Step 4: Connect the phase to one end of the tube and the neutral to the other end of the tube.
    • Step 5: Place the new LED tube and connect the electrical current.

    Where is it convenient to install LED tubes?

    The Led tubes are normally installed in those places with a lot of s lighting hours: Parking lighting, hotel lighting, university and college lighting, office lighting, shopping center lighting.

    For long periods of lighting, it is recommended to use LED tubes with a body of aluminum since they dissipate heat much better.

    Grade 
    Roberto Omar 08/18/2015