Led Trubic T8 18W 1.500Lm 120Cm Difúzor Mliečny - Zelená 40.000H [NE-T8-1200-18W-G-O]

Popis Led Trubic T8 18W 1.500Lm 120Cm Difúzor Mliečny - Zelená 40.000H [NE-T8-1200-18W-G-O]

The LED Tube is made of an aluminum body that offers greater rigidity and better heat dissipation, making it suitable for continuous lighting. with an opening angle of 120º and opal polycarbonate cover. Incorporates SMD2835 chip, emits less heat, increases service life with continuous ignition.

Benefits of an LED tube:

• The main advantage is energy savings of more than 50%. It should be noted that the consumption of a conventional tube, apart from its own consumption, requires a reactance whose consumption ranges between 3 and 8 Watts per tube. Another fundamental advantage is the saving in maintenance (replacement of primers, ballasts, and tubes ...) since the LED tube does not need ballasts or primers.
• Hours of life: LED tubes last more than 30,000 hours, compared to 10,000 hours for a good fluorescent tube
• Resistance: LED tubes can withstand much more shocks or vibrations than fluorescent tubes. In fact they are removable and repairable, something impossible for fluorescent tubes.
• Consumption: LED tubes consume up to 50% less than fluorescent tubes . A 60Cm T8-18W fluorescent tube with ballast and primer can consume twice its nominal power due to reactance. We are talking about a consumption of 36W compared to 8 or 12 W of the consumption of the 60Cm T8 LED tube.
• Starts: LED tubes are instant start and do not affect their life hours . On the other hand, a fluorescent tube takes time to start and the number of daily lights affects its life.
• Environment: LED tubes do not need any gas to light, fluorescent tubes are made with mercury vapor and mercury compounds, they are highly dangerous chemicals for human health and the environment.

Led tube installation instructions:

• Step 1: Disconnect the electrical current.
• Step 2 : Remove the conventional fluorescent tube.
• Step 3 : Unscrew and remove the primer, then disconnect the wires from the ballast.
• Step 4 : Connect the phase to one end of the tube and the neutral to the other end of the tube.
• Step 5 : Place the new led tube and connect the electric current.

In which places is it convenient to install LED tubes?

Led Tubes are normally installed in places with many hours of lighting: Parking lot lighting, Hotel lighting, University and College lighting, office lighting, shopping center lighting.

For long periods of ignition, it is advisable to use led tubes with an aluminum body as they dissipate heat much better.