LED Veľká Sila 1W 120Lm 6000ºK 35X35 50.000H [CH-LED-1W-35MIL-CW]

Popis LED Veľká Sila 1W 120Lm 6000ºK 35X35 50.000H [CH-LED-1W-35MIL-CW]

High Power LEDs are usually used for spot lighting with a light flow of light.

These LEDs are covered by a kind of silicone surrounded by a white plastic , supported by a metal base that acts as a pre-dissipating plate. Two metal arms emerge from the plastic structure from which the connection will be made. Due to their metal base, these must be mounted on another dissipating surface to avoid high temperatures .

The High Power LEDs have four connectors, 2 with positive polarity and 2 negative, from which it is possible to connect them by soldering them using a tin point.

Utilities:

• Individual: LED power supply directly from the power supply through a regulated source or with the use of resistors or regulators. The desired voltage must be supplied to the LED within of the working values.
• Parallel configuration la:power a group of LEDs by connecting all the anodes together and all the cathodes together,using the required voltage regulated by a single resistor in series.
• Series configuration:power a group of sequentially connected LEDs . The number of LEDs to use per series will be limited by the voltage delivered by the power supply.
• Polarization: the positive pole of the power supply must be connected to the anode (or to the beginning of the series) , while the negative pole must be connected to the cathode (or to the closure of the series).