Led-Rör T8 18W 1.673Lm 6000ºK 120Cm Roterande Huvud Funktioner de Nödsituation 60.000H [GR-T8RDDG18W-EM-CW-O]

Beskrivning av Led-Rör T8 18W 1.673Lm 6000ºK 120Cm Roterande Huvud Funktioner de Nödsituation 60.000H [GR-T8RDDG18W-EM-CW-O]

The LED Tube is made with an aluminum body that offers greater rigidity and better heat dissipation, making it suitable for continuous lighting. with an opening angle of 120º and opal polycarbonate cover. Incorporates SMD2835 chip, emits less heat, increases useful life with continuous on.

Characteristics:

• Incorporates emergency battery with an autonomy of 180 minutes +-20 min.
• The led tube has ordinary operation as long as it has power supply.
• The emergency mode will be activated automatically once the power has been cut off. The tube will stay on for the next two hours approximately with an emission of 250Lm.
• Once the electrical current is restored, the tube will work again at its maximum power.
• It will installed in parallel with other normal led tubes.

Benefits of an LED tube:

• The main advantage is energy savings , of more than 50%. It should be noted that the consumption of a conventional tube, apart from its own consumption, requires a ballast whose consumption ranges between 3 and 8 Watts per tube. Another fundamental advantage is the savings in maintenance (replacement of ballasts, ballasts, and tubes€¦) since the LED tube does not need ballasts or ballasts.
• Hours of life: The LED tubes last more than 30,000 hours , compared to 10,000 hours for a good fluorescent tube
• Resistance: LED tubes can withstand shocks or vibrations much more than fluorescent tubes. In fact, they are removable and repairable, something impossible for fluorescent tubes.
• Consumption: LED tubes consume up to 50% less than fluorescent tubes. A 900mm-18W fluorescent tube with ballast and primer can consume twice its rated power due to ballast. We are talking about a consumption of 36W compared to the 8 or 12 W of the consumption of the 600mm LED tube.
• Started: The LED tubes are instantaneous and do not affect their life hours. Instead, a fluorescent tube takes time to start and the number of daily starts affects its life.
• Environment: LED tubes do not need any gas to light up, fluorescent tubes are made with mercury vapor and Mercury compounds are highly dangerous chemicals for human health and the environment.