Main uses of LED industrial bells

1  Traditional industrial bells. Download lamps

As we mentioned earlier, download bulbs have been a great option when we had to provide lighting to facilities with very high roofs. With the development and introduction in the LED technology market this type of luminaires have become obsolete due to its high consumption and intermediate elements that are needed for its implementation. The most typical powers that can be found in industrial ships are 250 W for ceilings between 5-6 meters high and 450 W for ceilings with higher heights (for example 9 meters). In addition, in this type of circumstance lamps that its amount of lighting is considerably reduced with the passage of time due to the deterioration of the gas inside. Also, the fact of the reduction in lighting affects consumption, making it increase. In some cases, we can even see changes of shades. On some occasions, we can find industrial ships with fluorescent tubes facilities. We can find these types of facilities in low roofs or in specific points of production processes.

2  INDUSTRIAL LED bells. Efficient and effective solution

How we commented above, the introduction of LED technology in the world of lighting was a revolution and a new way of understanding things. LED bells have a series of advantages that make them a very attractive product. These are as follows: Fasting High Performance LM/W Long Useful Life (50,000 hours from LED bells compared to 10,000 hours of discharge bells) Fast energy savings Return of the Investment Homogeneous distribution of lighting without changes or hue of hue No amount of lighting IP65-66 Once the advantages of the LED bells offer us, we will recommend the proposed substitutions depending on the height or the bells that we have previously installed. If the ship we want to illuminate is new construction and we do not have any unlimited system, we will have to follow the following tips. If the height of the ship is between 5-6 meters the LED bells that are recommended are 100 W. For heights greater than 8-9 meters, the recommendation is 200 W in LED technology. For intermediate heights, the recommendation is to install bells of 150 W. If on the contrary, the ship already has lighting with discharge bells, the equivalence/replacement is very simple. The 250 W bells are replaced by 100 W and those of 450 W with the 200 W bells. Before following this rule to Rajataba it is advisable to know the type of bulb installed and know how lumens it supplies. In this way we can choose a LED bell with lumens equal and offer a substitution with all the guarantees of success.

3  European Standard on Lighting for Interiors (UNE 12464.1)

The requirements established in this rule are based on three factors of satisfaction of basic human needs, how they are. Visual comfort. Workers must have a feeling of well -being so that the correct performance of their functions is guaranteed with total. Visual benefits: workers will be able to perform their visual tasks without any disturbance and not having difficulty. Security. In this standard we can find established parameters that have to be guaranteed in all areas where any activity is developed. The main parameters that have to be measured and taken into account are the enlightenment (EM), the glare index (UGR) and the chromatic reproduction index (RA). Of all these parameters the most important is the column corresponding to the illuminance levels measured in Luxes since it will be the parameter that will mark us whether or not properly illuminated. Continuing with the theme of industrial ships and their lighting possibilities, the norm that we have previously cited stipulates a series of illuminance in different areas. For example, in the area where high precision works are carried out, the standard stipulates that there must be an amount of 1000 - 3000 Lux, while for Emabalo areas only between 100 and 400 lux are needed. As we have mentioned earlier, the lighting level is a very important favor and that on innumerable occasions it is not given the importance it deserves. Guaranteeing a level of lighting according to the task that is being developed, makes security increase, as well as the level of production. In conclusion we can say that with the replacement of the discharge bells, for which they use LED technology, they guarantee us saving in maintenance costs because they do not have to change so often the bulbs and the life hours of useful LED technology guarantees us between 30,000 - 50,000 hours of life without any problem. In addition, with change, we improve the quality of light and better perception and recognition of colors. Also, a correct and efficient distribution of lighting is guaranteed improving the NIVLES of productivity, security and work environment.