LED luminous brick. Uses and installation

Solve your doubts and know the entire LED brick catalog that we have in Greenice.

See bricks

In this category you can find all the types of bricks that we offer you to illuminate in an original way and know the advantages of this product.

LED light bricks represent an alternative for very effective decoration since they produce the sensation of amplitude and luminosity at the same time, giving a positive effect on the works, highlighting the place when producing a modern environment.

1 LED luminous bricks

There is a wide variety of applications for LED luminous bricks, when decorating spaces, both outdoor and indoors is very effective, and easy to perform. This type of product is very useful for soil and wall facilities, we can find them in garage inputs, gardens, terraces, patios, squares, facades, walls, internal and external common areas, among others.

2 Soil facilities

LED luminous bricks can be installed on the ground, can be found on roads, pool areas, gardens, etc. LED luminous bricks have an IP67 protection index, which makes it possible to be installed, not only in soils located in interior environments, but also in exterior environments where they can be seen exposed to the demands of time without any type of problem. We recommend installing the concrete box so that the installation is safe and avoid possible damage caused by the passage of time.

3 Paredes facilities

There are many alternatives that can be generated by using LED light bricks in wall decorations (both indoors and exterior), in courtyards, terraces, common areas, achieve an amplitude effect, also giving it a feeling of modern and at the same time cozy atmosphere, With the exact amount of light to illuminate stays, both in white and the multiple colors (RGB) alternative that can be controlled by DMX by adding a controller.

4 Other alternatives for ground facilities

Traditionally to perform decorative lighting on the ground on the ground, the exterior spotlights are used to embed, which offer a widely used and economical alternative, giving some decorative light for roads, gardens, terraces, among other sites. However, these types of spotlights do not have the versatility of DMX control to control the multicolored spotlights that LED luminous bricks have. In addition, the latter offer a different decorative solution, in the appearance of a brick, adapting to almost all construction systems. It should be noted that most of these spotlights to recessed abroad are very easy to install, thus offering the possibility of anyone to be able to install.

5 LED luminous brick installation

To install this product, you simply have some basic materials and equipment (cables, screwdrivers, DMX controller, power supply), then follow the installation and safety steps established in the product installation manual, and finally enjoy a Modern decoration and lighting immediately. The steps are very simple, basically it is about installing the box where the brick will be placed, wiring and connections between bricks and the controller and between the controller and the power supply. Finally, control the lights by means of the controller, or by means of the remote control that is included in the DMX controller package. The installation of LED luminous bricks is very easy, following the recommendations that we explain here you can carry out the installation without any problem, as long as these tips are taken into account. Likewise, all related activities are done with relevant security precautions to avoid any incident. In addition, it is worth saying that all maneuvers and connections must be performed with the food source disconnected. In order to install the luminous LED bricks, it is necessary to take some steps and have some materials and equipment:

  • 24VDC power supply.
  • DMX512 controller
  • LED brick with its respective box.
  • Cables and screwdriver.
Once the materials and equipment organized in a comfortable and visible place are taken, three main activities must be carried out. The first would be to test all the products before performing any installation, so we make sure that everything works correctly and that we have clearly understood how all connections should be. It can be done in a clean and comfortable place to work, with the purpose of visualizing all the necessary details to do the installation. Then the corresponding wiring and cages are installed. And finally, the connections are made, always leaving last the connection of the power supply for security reasons. Entering the subject we leave the detailed steps that must be followed for the installation of LED bricks:
  1. Remove the metal cover from the box
  2. Place the brick inside the box
  3. Connect the brick power cable to the DMX512 controller
  4. Connect both the signal and power cables, that is, the signal cables (yellow, red, white and green) must be connected to the DMX1 or DMX2 terminals, as shown in the following image.
  5. The feed cables (brown and blue respectively) are connected to the 24VDC power supply. The controller input must be connected to the power supply (the “7-32V” terminal in the positive and the “GND” terminal in the negative).
  6. Finally, the memory card is inserted into the DMX512 controller slot and the power supply to the electricity grid is connected.
A small test of all devices should be done before installation. It is also recommended to perform an estimate of the wiring that is required to perform, taking into account that from the controller to the bricks, six cables are needed. If possible, it is recommended to use cables from the following colors: brown, blue, yellow, red, white and green.

Return to the blog