Installation and assembly of ceiling fans with Led Greenice light
Do you doubt how to install a roof fans? Tet we bring all the solutions.
See installation video tutorials
Assembly video tutorials of all our models.
Ceiling fans with Greenice brand LED light are a perfect option to keep your home fresh and well illuminated throughout the year. We encourage you to see the installation videos that we have prepared from the different fans. In addition, then we briefly indicate the steps that you must follow at the time of its assembly:.
1 Preparation
Before starting the installation, make sure you have all the necessary tools. These may include a screwdriver, a drill, a safe and insulating ladder of electricity. In addition, it verifies that the electric box on the ceiling is strong enough to support the fan weight.
2 Electricity off
For safety reasons, be sure to turn off the electricity of the room where you are going to install the fan. This can be achieved by disconnecting the corresponding switch in the electric panel of your home.
3 Base assembly
Locate the fan base and align the holes with those of the electric box on the ceiling. With the help of a drill, fix the base to the roof using the screws provided. Make sure the base is firmly assured to avoid any unwanted movement.
4 Electrical connection
Remove the access panel at the fan base. Connect the electrical fan cables with those of the electric box on the ceiling. Usually, this implies connecting the similar color cables (black with black, white with white, and green or copper with green or copper). Use your screwdriver to ensure connections and put the access panel again.
5 Aspas assembly
Screw each of the blades instead in the fan engine. Be sure to follow the manufacturer's instructions to ensure that the blades are correctly installed and balanced. Firmly squeeze the screws, but avoid squeezing them in excess so as not to damage the engine.
6 LED light installation
If the fan includes a LED light, be sure to connect it following the manufacturer's instructions. This may involve connecting the corresponding cables and setting the screen or cover of light in place.
7 Test and final adjustments
Before the end of the installation, turn on electricity and test the operation of the fan and LED light. Make sure everything is in order and that there are no unusual noise or vibrations. If necessary, make additional adjustments in the blades or lighting.
With these steps, you should be able to mount and install your ceiling fan with LED Greenice light properly. Remember to follow the specific instructions provided by the manufacturer and, in case of doubts or difficulties, do not hesitate to seek the advice of a qualified electrician. Enjoy the comfort and lighting that this fan will give you in your home ..